Customer Order Management
GO9 Plug & Play GPS Fleet Module with IOX Expansion Capabilities for 3rd Party Add-Ons
• Advanced Reporting
• Driver Behavior Management
• Robust Engine Data Reporting
• GPS Vehicle Tracking
• Route Optimization
• Engine Health & Maintenance
• Open Data Integration
• Custom Mapping
• Driver management
Geotab GO9 (harnesses purchased seperately select from T-Harness)
IOX DRIVER ID NFC READER MODULE
The IOX-NFCREADER integrates Near Field Communication (NFC) with the GO Device to help identify which drivers are operating which vehicles in a fleet at any given time. Drivers tap a Driver ID key to against a vehicle’s driver identification reader to identify themselves. Each key has a serial number that is associated with a specific user account. Fleet Managers can utilize MyGeotab to create rules, reports, and exceptions based on individual drivers or vehicles.
Driver Identification Management
• Fleet managers can run reports based on specific drivers to better manage driving habits
• Rule exception reports by driver can be set up to determine if certain drivers are more prone to violating rules
• Track driver data across different vehicles
Driver NFC IOX to be plugged into Geotab GO9 IOX Port. Key fobs sold seperately
IOX GOTALK for In Vehicle Speech
Using text-to-speech, the IOX-GOTALK provides real-time feedback to drivers based on predefined rules. Any rules that the GO device uses to alert the driver with beeps can be used with the IOX-GOTALK. Custom text for based rules can be added to provide specific messaging to help the driver understand what they may have done right or wrong.
Benefits to customized messages include the ability to create a message specific to the violation being encountered, as well as the ability to create the kinds of positive messages your drivers will respond to. Include tokens such as driver name, address of the violation, and zone name to provide the driver with a detailed account as to where and when the violation occurred.
Immediate feedback to the driver, regardless of cellular coverage, includes all device-based rules:
1. Reminder for a driver to swipe their NFC fob or sticker
2. Revving over a customer-configurable threshold (i.e. 4000 RPMs)
3. Idling beyond a customer-configurable threshold
4. Speeding beyond a customer-configurable threshold
5. Approaching the maximum speed limit defined by the customer
6. “Dangerous Driving” as defined by the customer
7. Seat belt usage (if supported by the vehicle)
8. With the addition of Active Tracking, drivers will get near-real-time feedback (generally within 5-10 seconds) when in good coverage from MyGeotab-based rules as well.
IOX-GOTALK to be plugged into Geotab GO9 IOX Port
Blue NFC Plastic Key Fob. Scan key fob onto installed IOX DRIVERID NFC Reader module to associate driver to vehicle. Instructions on setting up driver id key fob on MyGeotab: https://www.gofleet.com/question/driver-id-nfc-install-and-mygeotab-setup/
Add SPR Relay for ignition interlock to prevent vehicle start.
Blue Key Fob
INSTALL Universal OBDii T-Harness
Standard anti-tamper hidden install t-harnesses for OBDii type vehicles.
Install Video: https://www.gofleet.com/gps-device-install-t-harness-kit"
INSTALL Harness for Heavy Duty 9 Pin T-CAN UNIVERSAL
Universal CANBus T-Harness 9 Pin connector for ECM connection to Heavy Duty Vehicles (J1939 Protocol)
Universal adapters make it easy to install on any 9 Pin Port. Please note caterpillar heavy equipment requires a special connector due to pin configuration.
Connect T-CAN harness to Geotab GO7
"ZenduCAM Bundle Includes: Road and Driver Channel HD (720p) Intelligent Accident Cameras with built-in GPS, speed sensitive 3-Axis G-Sensor, Mic, two SD card slots (Up to 128GB capacity, 32GB Included for up to 32 hours local storage). Tamper-resistant locking enclosure, 3M VHB Adhesive Windshield Pad. 50cm lead cable for 2nd camera, included power adapter with delayed power shutdown, & USB inputs for Included 3G Modem.
2nd Channel Camera: 120° Wide-angle Sony CCD camera (400TV lines). IP68 weatherproof rating and 8 infrared LEDs for nighttime visibility. 5m plug & play cable for direct connection to KP1S camera input 2."
HD (1080p) Intelligent Accident Camera with built-in GPS, 3-Axis G-Sensor, Mic, 3G cellular modem with Sim card slot (compatible with T-Mobile and AT&T), and SD card slot (32GB capacity). Secure cover for SD/SIM slots, 3M VHB Adhesive Windshield Pad, and void/tamper security seal. Power adaptor included [2 Alarm Inputs, 1 Alarm Output, IGN+, Power (BAT+), Ground (BAT-). Delayed power shutdown feature. DC input 10.8V~30V]. PC Analysis software & Configuration Tool included. PTCRB Certified. Includes 32 GB Card.
Combines a powerful fleet ready tablet at an affordable price. This 7" Android tablet comes ready to go with security configurations, and Geotab Drive app installation. No additional security configuration or wiring is required. (requires GeotabDrive+250mb monthly service plan for HOS/DVIR/Truckmate/Messaging services).
Custom Report Development (Hrs)
Custom excel report consulting and development for customer. QTY = Hours required for development (please get quotation from Success Manager)
Professional Installation (Hrs)
Hourly rate for trained and certified professional installer. Travel for costs are included within 50km/30miles of a certified professional installer.
Mileage costs and travel expenses can be estimated by contacting the professional installer. Please refer to installer list http://bit.ly/goinstallers to set appointment for installation.
CANBus T-Harness 6 Pin connector for ECM connection to Heavy Duty Vehicles (J1708 Protocol)